Carpet foam mixed latex consists of three components: material A, B and C:
-Material A: A mixture of natural latex and synthetic latex, and the main ingredients are latex, fillers, stabilizers, antioxidants, and foaming agents
-Material B: vulcanization system water dispersion, the main component is vulcanization agent, main facilitator.
-Material C: Casing agent, including gel setting agent, gel setting promoting agent.
Performance parameters for the item A components
the name of a shop | Solid content (%) | PH price | Viscosity (cp, rotor # 5,100rpm) | pigment | Product wear resistance |
CF20 | 70-71 | 10-11 | 1100-1300 | ivory | outstanding |
CF30 | 71-72 | 10-11 | 1100-1300 | ivory | fine |
CF40 | 71-72 | 10-11 | 1200-1400 | ivory | same as |
Performance parameters of item B, component C
Indicator project | B material | C material |
Solid content (%) | 50 | 30-45 |
PH price | 10-11 | 10-11 |
Viscosity (cp, 100rpm) | 600-800 | 15 |
pigment | buff | Colourless clarification |
Note: Materials A, B shall be stirred for 10-15 minutes before use. Avoid sunlight exposure during storage, and the storage temperature is at 5℃ -35℃.
Recommended use ratio
the name of a shop | Item A dosage | Item B dosage | Material C dosage |
CF20 | 100 | 5.0-5.5 | 4 |
CF30 | 100 | 4.0-4.5 | 4 |
CF40 | 100 | 3.5-4.0 | 4 |
matters need attention:
Materials A and B are fully stirred evenly before use, which is very important for the stability of product quality. Please follow it.
Suggestions:
1. The temperature of the sulfide package is controlled within 130 degrees, which is of great help to the wear resistance of the product.
2. The air volume of the vulcanized oven has a great influence on the vulcanization speed. It is suggested that customers should increase the air volume and reduce the temperature so as to get the best wear resistance of the product.